5-Amp Pro Brushless ESC

Key Features

• Up to 5-amp continuous current with proper air flow
• Drives up to 4 sub-micro servos on 2S
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low-voltage cutoff with settings for 2-cell Li-Po or 74% of battery starting voltage
• Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
• Soft start
• Auto motor shut down if signal is lost or there is interference
• Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
• Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads

Overview

The E-flite® 5-Amp Pro Brushless ESC has been designed for use in radio control aircraft and to support continuous currents of up to 5 amps when using 2 Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.

Specs

• Brake:Yes - Programmable
• Continuous Maximum Current:5A
• Momentary Peak Current:6A (15 sec)
• Dimensions (WxLxH):17mm (.67 in) x 25mm (1 in) x 7mm (.27 in)
• Weight:8 g (.28 oz)
• Wire Gauge:22AWG with JST connector on battery input leads or 22AWG with 2mm female gold bullet connectors on motor output leads
• Cells w/BEC:2–3S Li-Po or 6–7 cell Ni-MH/Ni-Cd